EcuMaster DET 3 + map 4b

Digital ECU Tuner 3 is the most popular device of the type "piggy back" on our market. Due to its large capabilities and very attractive price, it has gained a large number of satisfied customers.

Features of the device:

• built-in MAP sensor 400kPa
• 4 independent 16x16 maps (fuel map, two PWM maps, ignition map),
• 8 maps of 16x1 correction,
• 2 independent, switchable map sets,
• the possibility of modifying a single analog signal,
• 4 analog inputs,
• built-in DataFlash that allows you to log signals without a connected laptop,
• measurement of supply voltage,
• the ability to modify the frequency flowmeter signal (17Hz-4kHz),
• operation of the ignition signal using inductive sensors, Hall, optical and signals controlling the ignition module. The device supports both single ended and balanced (differential) signals,
• support for multiple ignition types: 60-2, 36-2, 36-1, Multitooth, Ignition Modules,
• operation of the turbocharger boost control valve,
• support for 4 high-resistance injectors (full group operation),
• ON/OFF output controlled parametrically,
• automatic conversion from MAP to MAF using the learning algorithm,
• take-off procedure, road dynamometer,
• the ability to calibrate any analog sensor so that analog values can be displayed in their real values (e.g. signal from the MAP sensor in bars, signal from the broadband probe as AFR, etc.),
• possibility of free firmware update as the device develops (e.g. new ignition modes, additional functions),
• Fuel Implant technology for controlling fuel in stand alone mode.
• Communication with the device is carried out using a USB connector
• 24 months warranty on the device.

Hardware requirements:

• Windows 2000, XP, Vista, Windows 7, Windows 8
• Screen resolution at least 1024x768 16bit,
• Processor with a clock at least 600MHz,
• USB port.

Set Composition:

• Digital Ecu Tuner 3,
• USB AA cable,
• Plugin,
• Set of pins for plug,
• An additional set of resistors and a rectifier diode useful when installing the device.

Ecumaster products are not shipped to the US, Canada or Mexico. Ecumaster brand products are not shipped to the USA, Canada and Mexico.

2270HP and 2200Nm - this is the power of our demo car Tsunami bimoto Calibra, the fastest twin-engine car in the world! The car created for 1/4 mile races on FMIC parts accelerates from 0-300km/h below 10 seconds and for several seasons was classified on the highest steps of the podium. These facts confirm the highest quality and durability of our parts.

Our parts are used by the leading names in Polish and European drifting, including: Paweł Trela (Opel GT 870HP), Bartosz Ostałowski (Nissan 200sx 1000HP), Adam Zalewski (BMW e30 900HP), Karolina Pilarczyk (Nissan 200sx 750HP), Piotr Kozłowski (BMW e30 600HP), Grzegorz Hypki (BMW e30 650HP), Paweł Korpuliński (BMW e82 800HP), Wojciech Goździewicz (BMW e36 700HP), Maciej Jarkiewicz (Toyota Supra 750HP), and many more!

Thanks to our components, many drivers have won championship titles in the most important leagues both in Poland (Drift Open, PFD, Drift Masters Grand Prix) and worldwide (King of Europe, Formula Drift, Drift Masters European Championship).